Tag: windows-2000

Questions Related to windows-2000

You are responsible for maintaining the Windows 2000 Server installations in your network. Your network includes Windows NT Server 4.0 computers, NT Workstation 4.0 computers and Unix computers. The network consists of a single Windows NT domain. You are

server windows-2000

  1. upgrade any DNS server to Windows 2000 domain controller, then promote Server1 to PDC and upgrade it

  2. promote Server1 to PDC and upgrade it

  3. upgrade the PDC to Windows 2000, then promote Server1 to PDC and upgrade it

  4. upgrade any other BDC to Windows 2000, then promote Server1 to PDC and upgrade it

Show answer
Correct Option: B

You install the RRAS service on a Windows 2000 server computer on your network. Your network is not directly connected to the Internet and uses the Private IP address range of 192.168.0.0 - 192.168.255.255. When you use RRAS to dial in to the server, your

server windows-2000

  1. Authorize the RRAS server to receive multiple addresses from a DHCP server

  2. Configure the RRAS server with the address of the DHCP server

  3. Ensure that the RRAS server is able to connect to a DHCP server that has a scope for its subnet

  4. Configure the RRAS server to act as a DHCP relay agent

Show answer
Correct Option: C

Your Windows 2000 server has one hard disk. This computer runs a custom application that writes a large number of small temporary files in a single directory to support requests from users' computers. To improve performance of the application you add thre

server windows-2000

  1. Create a striped volume

  2. Create a single volume on disk one and extend the volume to create a spanned volume

  3. Create a RAID 5 volume

  4. Mount the roots of Disk 2 and 3 in the root folder of Disk 1

Show answer
Correct Option: A

You are responsible for maintaining the Windows 2000 Server installations in your network. After a new adapter driver is installed onto your RAS server by your assistant Jay, one of the users at a remote location reports that the server does not accept ca

server windows-2000

  1. update.exe with the /slip switch

  2. spupdate.exe

  3. update.exe with the /stream switch

  4. spupdate.exe with the /slipstream switch

  5. slipupdate.exe

Show answer
Correct Option: A

Which of the following are conditions required for installing W2K over the network?
server windows-2000

  1. Create a distribution server which has a file share containing the contents of the /i386 directory from the Windows 2000 CD-ROM.

  2. 1 GB minimum plus 200 MB free drive space to hold temporary files

  3. 500 MB minimum plus 200 MB free drive space to hold temporary files

  4. Create a distribution server which has a file share containing the contents of the /winnt directory from the Windows 2000 CD-ROM.

  5. A&B

Show answer
Correct Option: E

You are responsible for maintaining the Windows 2000 Server installations in your network. You have a SMP server that runs both 32bit and 16bit applications. Based on the advice from your boss, these 16bit applications are configured to run in the same me
server windows-2000

  1. performance monitoring is to be done via thread IDs

  2. performance monitoring is to be done via NTVDM instance

  3. the 16-bit applications can be running simultaneously

  4. multiple 16-bit application threads can be running simultaneously

Show answer
Correct Option: A

After a recent re-structure of your company you have decided to move a domain controller to the Investment Department at Main office to act as a Mail Server running Microsoft Exchange 2000. Which one of the following procedures would you use to demote the

server windows-2000

  1. Use Computer Management snap-in and select the "demote" option

  2. Run the "DCPROMO.EXE" utility.

  3. Reinstall Windows 2000 Server on the domain controller and selecting it as a member server during the installation.

  4. Alter its role into a member server in the Catalogue Index Server on the Master Domain controller.

Show answer
Correct Option: B

Your network includes Windows 98 computers and Windows 2000 Server computers. You are adding a new computer to the network, and you plan to install Windows 2000 Server on the new computer. The computer has one 20-GB hard disk with no partitions defined. T

server windows-2000

  1. Start the new computer by using a Windows 98 network boot disk.Create and format a single FAT32 partition.Connect to the network server.Run Winnt.exe.

  2. On another Windows 2000 computer, format a floppy disk. Copy NTLDR, Boot.ini, Ntdetect.com, and Ntbootdd.sys to this disk. Start the new computer by u

  3. Start the new computer by using a Windows 98 network boot disk.Connect to the network server.Run Dsclient.exe.Create and format a 20-GB FAT32 partitio

  4. Start the computer by using a Windows 98 network boot disk.Create and format a single FAT32 partition.Start the new computer by using a Windows 2000 E

  5. On another Windows 2000 computer, use Makebt32.exe to create installation startup disks. Start the new computer by using the first disk.

Show answer
Correct Option: A

You are responsible for maintaining the Windows 2000 Server installations in your network. You are configuring the security policy for a group of users in the finance organizational unit. You are requested by your boss to configure a group policy to ensur

server windows-2000

  1. you did not configure the refresh interval for all the computers

  2. you did not replicate the configuration to all the domain controllers

  3. you did not configure the refresh interval for all the users

  4. you did not configure the refresh interval for the EVERYONE group

Show answer
Correct Option: A

User mode layer is made up of 2 subsystems: environmental subsystem and integral subsystem. Identify components of Integral subsystems:

server windows-2000

  1. Security

  2. Workstation service

  3. Server service

  4. All of the above

Show answer
Correct Option: D